Programming with dplyr

Data- and env-variables

The key idea behind data masking is that it blurs the line between the two different meanings of the word “variable”:

• env-variables are “programming” variables that live in an environment. They are usually created with <-.

• data-variables are “statistical” variables that live in a data frame. They usually come from data files (e.g. .csv, .xls), or are created manipulating existing variables.

To make those definitions a little more concrete, take this piece of code:

df <- data.frame(x = runif(3), y = runif(3))
df$x
#> [1] 0.08075014 0.83433304 0.60076089

It creates a env-variable, df, that contains two data-variables, x and y. Then it extracts the data-variable x out of the env-variable df using $.

I think this blurring of the meaning of “variable” is a really nice feature for interactive data analysis because it allows you to refer to data-vars as is, without any prefix. And this seems to be fairly intuitive since many newer R users will attempt to write diamonds[x == 0 | y == 0, ].

Unfortunately, this benefit does not come for free. When you start to program with these tools, you’re going to have to grapple with the distinction. This will be hard because you’ve never had to think about it before, so it’ll take a while for your brain to learn these new concepts and categories. However, once you’ve teased apart the idea of “variable” into data-variable and env-variable, I think you’ll find it fairly straightforward to use.

Indirection

The main challenge of programming with functions that use data masking arises when you introduce some indirection, i.e. when you want to get the data-variable from an env-variable instead of directly typing the data-variable’s name. There are two main cases:

• When you have the data-variable in a function argument (i.e. an env-variable that holds a promise²), you need to embrace the argument by surrounding it in doubled braces, like filter(df, {{ var }}).

  The following function uses embracing to create a wrapper around summarise() that computes the minimum and maximum values of a variable, as well as the number of observations that were summarised:

  var_summary <- function(data, var) {
    data %>%
      summarise(n = n(), min = min({{ var }}), max = max({{ var }}))
  }
  mtcars %>% 
    group_by(cyl) %>% 
    var_summary(mpg)

• When you have an env-variable that is a character vector, you need to index into the .data pronoun with [[, like summarise(df, mean = mean(.data[[var]])).

  The following example uses .data to count the number of unique values in each variable of mtcars:

  for (var in names(mtcars)) {
    mtcars %>% count(.data[[var]]) %>% print()
  }

  Note that .data is not a data frame; it’s a special construct, a pronoun, that allows you to access the current variables either directly, with .data$x or indirectly with .data[[var]]. Don’t expect other functions to work with it.

Name injection

Many data masking functions also use dynamic dots, which gives you another useful feature: generating names programmatically by using := instead of =. There are two basics forms, as illustrated below with tibble():

• If you have the name in an env-variable, you can use glue syntax to interpolate in:

  name <- "susan"
  tibble("{name}" := 2)
  #> # A tibble: 1 × 1
  #>   susan
  #>   <dbl>
  #> 1     2

• If the name should be derived from a data-variable in an argument, you can use embracing syntax:

  my_df <- function(x) {
    tibble("{{x}}_2" := x * 2)
  }
  my_var <- 10
  my_df(my_var)
  #> # A tibble: 1 × 1
  #>   my_var_2
  #>      <dbl>
  #> 1       20

Learn more in ?rlang::`dyn-dots`.

The tidyselect DSL

Underneath all functions that use tidy selection is the tidyselect package. It provides a miniature domain specific language that makes it easy to select columns by name, position, or type. For example:

• select(df, 1) selects the first column; select(df, last_col()) selects the last column.

• select(df, c(a, b, c)) selects columns a, b, and c.

• select(df, starts_with("a")) selects all columns whose name starts with “a”; select(df, ends_with("z")) selects all columns whose name ends with “z”.

• select(df, where(is.numeric)) selects all numeric columns.

You can see more details in ?dplyr_tidy_select.

Indirection

As with data masking, tidy selection makes a common task easier at the cost of making a less common task harder. When you want to use tidy select indirectly with the column specification stored in an intermediate variable, you’ll need to learn some new tools. Again, there are two forms of indirection:

• When you have the data-variable in an env-variable that is a function argument, you use the same technique as data masking: you embrace the argument by surrounding it in doubled braces.

  The following function summarises a data frame by computing the mean of all variables selected by the user:

  summarise_mean <- function(data, vars) {
    data %>% summarise(n = n(), across({{ vars }}, mean))
  }
  mtcars %>% 
    group_by(cyl) %>% 
    summarise_mean(where(is.numeric))

• When you have an env-variable that is a character vector, you need to use all_of() or any_of() depending on whether you want the function to error if a variable is not found.

  The following code uses all_of() to select all of the variables found in a character vector; then ! plus all_of() to select all of the variables not found in a character vector:

  vars <- c("mpg", "vs")
  mtcars %>% select(all_of(vars))
  mtcars %>% select(!all_of(vars))

User-supplied data

If you check the documentation, you’ll see that .data never uses data masking or tidy select. That means you don’t need to do anything special in your function:

mutate_y <- function(data) {
  mutate(data, y = a + x)
}

One or more user-supplied expressions

If you want the user to supply an expression that’s passed onto an argument which uses data masking or tidy select, embrace the argument:

my_summarise <- function(data, group_var) {
  data %>%
    group_by({{ group_var }}) %>%
    summarise(mean = mean(mass))
}

This generalises in a straightforward way if you want to use one user-supplied expression in multiple places:

my_summarise2 <- function(data, expr) {
  data %>% summarise(
    mean = mean({{ expr }}),
    sum = sum({{ expr }}),
    n = n()
  )
}

If you want the user to provide multiple expressions, embrace each of them:

my_summarise3 <- function(data, mean_var, sd_var) {
  data %>% 
    summarise(mean = mean({{ mean_var }}), sd = sd({{ sd_var }}))
}

If you want to use the name of a variable in the output, you can embrace the variable name on the left-hand side of := with {{:

my_summarise4 <- function(data, expr) {
  data %>% summarise(
    "mean_{{expr}}" := mean({{ expr }}),
    "sum_{{expr}}" := sum({{ expr }}),
    "n_{{expr}}" := n()
  )
}
my_summarise5 <- function(data, mean_var, sd_var) {
  data %>% 
    summarise(
      "mean_{{mean_var}}" := mean({{ mean_var }}), 
      "sd_{{sd_var}}" := sd({{ sd_var }})
    )
}

Any number of user-supplied expressions

If you want to take an arbitrary number of user supplied expressions, use .... This is most often useful when you want to give the user full control over a single part of the pipeline, like a group_by() or a mutate().

my_summarise <- function(.data, ...) {
  .data %>%
    group_by(...) %>%
    summarise(mass = mean(mass, na.rm = TRUE), height = mean(height, na.rm = TRUE))
}

starwars %>% my_summarise(homeworld)
#> # A tibble: 49 × 3
#>   homeworld    mass height
#>   <chr>       <dbl>  <dbl>
#> 1 Alderaan       64   176.
#> 2 Aleen Minor    15    79 
#> 3 Bespin         79   175 
#> 4 Bestine IV    110   180 
#> # ℹ 45 more rows
starwars %>% my_summarise(sex, gender)
#> `summarise()` has grouped output by 'sex'. You can override using the `.groups`
#> argument.
#> # A tibble: 6 × 4
#> # Groups:   sex [5]
#>   sex            gender      mass height
#>   <chr>          <chr>      <dbl>  <dbl>
#> 1 female         feminine    54.7   172.
#> 2 hermaphroditic masculine 1358     175 
#> 3 male           masculine   80.2   179.
#> 4 none           feminine   NaN      96 
#> # ℹ 2 more rows

When you use ... in this way, make sure that any other arguments start with . to reduce the chances of argument clashes; see https://design.tidyverse.org/dots-prefix.html for more details.

Creating multiple columns

Sometimes it can be useful for a single expression to return multiple columns. You can do this by returning an unnamed data frame:

quantile_df <- function(x, probs = c(0.25, 0.5, 0.75)) {
  tibble(
    val = quantile(x, probs),
    quant = probs
  )
}

x <- 1:5
quantile_df(x)
#> # A tibble: 3 × 2
#>     val quant
#>   <dbl> <dbl>
#> 1     2  0.25
#> 2     3  0.5 
#> 3     4  0.75

This sort of function is useful inside summarise() and mutate() which allow you to add multiple columns by returning a data frame:

df <- tibble(
  grp = rep(1:3, each = 10),
  x = runif(30),
  y = rnorm(30)
)

df %>%
  group_by(grp) %>%
  summarise(quantile_df(x, probs = .5))
#> # A tibble: 3 × 3
#>     grp   val quant
#>   <int> <dbl> <dbl>
#> 1     1 0.361   0.5
#> 2     2 0.541   0.5
#> 3     3 0.456   0.5

df %>%
  group_by(grp) %>%
  summarise(across(x:y, ~ quantile_df(.x, probs = .5), .unpack = TRUE))
#> # A tibble: 3 × 5
#>     grp x_val x_quant   y_val y_quant
#>   <int> <dbl>   <dbl>   <dbl>   <dbl>
#> 1     1 0.361     0.5  0.174      0.5
#> 2     2 0.541     0.5 -0.0110     0.5
#> 3     3 0.456     0.5  0.0583     0.5

Notice that we set .unpack = TRUE inside across(). This tells across() to unpack the data frame returned by quantile_df() into its respective columns, combining the column names of the original columns (x and y) with the column names returned from the function (val and quant).

If your function returns multiple rows per group, then you’ll need to switch from summarise() to reframe(). summarise() is restricted to returning 1 row summaries per group, but reframe() lifts this restriction:

df %>%
  group_by(grp) %>%
  reframe(across(x:y, quantile_df, .unpack = TRUE))
#> # A tibble: 9 × 5
#>     grp x_val x_quant  y_val y_quant
#>   <int> <dbl>   <dbl>  <dbl>   <dbl>
#> 1     1 0.219    0.25 -0.710    0.25
#> 2     1 0.361    0.5   0.174    0.5 
#> 3     1 0.674    0.75  0.524    0.75
#> 4     2 0.315    0.25 -0.690    0.25
#> # ℹ 5 more rows

Transforming user-supplied variables

If you want the user to provide a set of data-variables that are then transformed, use across() and pick():

my_summarise <- function(data, summary_vars) {
  data %>%
    summarise(across({{ summary_vars }}, ~ mean(., na.rm = TRUE)))
}
starwars %>% 
  group_by(species) %>% 
  my_summarise(c(mass, height))
#> # A tibble: 38 × 3
#>   species   mass height
#>   <chr>    <dbl>  <dbl>
#> 1 Aleena      15     79
#> 2 Besalisk   102    198
#> 3 Cerean      82    198
#> 4 Chagrian   NaN    196
#> # ℹ 34 more rows

You can use this same idea for multiple sets of input data-variables:

my_summarise <- function(data, group_var, summarise_var) {
  data %>%
    group_by(pick({{ group_var }})) %>% 
    summarise(across({{ summarise_var }}, mean))
}

Use the .names argument to across() to control the names of the output.

my_summarise <- function(data, group_var, summarise_var) {
  data %>%
    group_by(pick({{ group_var }})) %>% 
    summarise(across({{ summarise_var }}, mean, .names = "mean_{.col}"))
}

Loop over multiple variables

If you have a character vector of variable names, and want to operate on them with a for loop, index into the special .data pronoun:

for (var in names(mtcars)) {
  mtcars %>% count(.data[[var]]) %>% print()
}

This same technique works with for loop alternatives like the base R apply() family and the purrr map() family:

mtcars %>% 
  names() %>% 
  purrr::map(~ count(mtcars, .data[[.x]]))

(Note that the x in .data[[x]] is always treated as an env-variable; it will never come from the data.)

Use a variable from an Shiny input

Many Shiny input controls return character vectors, so you can use the same approach as above: .data[[input$var]].

library(shiny)
ui <- fluidPage(
  selectInput("var", "Variable", choices = names(diamonds)),
  tableOutput("output")
)
server <- function(input, output, session) {
  data <- reactive(filter(diamonds, .data[[input$var]] > 0))
  output$output <- renderTable(head(data()))
}

See https://mastering-shiny.org/action-tidy.html for more details and case studies.