Package 'dplyr'

Description

across() makes it easy to apply the same transformation to multiple columns, allowing you to use select() semantics inside in "data-masking" functions like summarise() and mutate(). See vignette("colwise") for more details.

if_any() and if_all() apply the same predicate function to a selection of columns and combine the results into a single logical vector: if_any() is TRUE when the predicate is TRUE for any of the selected columns, if_all() is TRUE when the predicate is TRUE for all selected columns.

If you just need to select columns without applying a transformation to each of them, then you probably want to use pick() instead.

across() supersedes the family of "scoped variants" like summarise_at(), summarise_if(), and summarise_all().

Usage

across(.cols, .fns, ..., .names = NULL, .unpack = FALSE)

if_any(.cols, .fns, ..., .names = NULL)

if_all(.cols, .fns, ..., .names = NULL)

Arguments

Details

When there are no selected columns:

• if_any() will return FALSE, consistent with the behavior of any() when called without inputs.

• if_all() will return TRUE, consistent with the behavior of all() when called without inputs.

Value

across() typically returns a tibble with one column for each column in .cols and each function in .fns. If .unpack is used, more columns may be returned depending on how the results of .fns are unpacked.

if_any() and if_all() return a logical vector.

Timing of evaluation

R code in dplyr verbs is generally evaluated once per group. Inside across() however, code is evaluated once for each combination of columns and groups. If the evaluation timing is important, for example if you're generating random variables, think about when it should happen and place your code in consequence.

gdf <-
  tibble(g = c(1, 1, 2, 3), v1 = 10:13, v2 = 20:23) %>%
  group_by(g)

set.seed(1)

# Outside: 1 normal variate
n <- rnorm(1)
gdf %>% mutate(across(v1:v2, ~ .x + n))
#> # A tibble: 4 x 3
#> # Groups:   g [3]
#>       g    v1    v2
#>   <dbl> <dbl> <dbl>
#> 1     1  9.37  19.4
#> 2     1 10.4   20.4
#> 3     2 11.4   21.4
#> 4     3 12.4   22.4

# Inside a verb: 3 normal variates (ngroup)
gdf %>% mutate(n = rnorm(1), across(v1:v2, ~ .x + n))
#> # A tibble: 4 x 4
#> # Groups:   g [3]
#>       g    v1    v2      n
#>   <dbl> <dbl> <dbl>  <dbl>
#> 1     1  10.2  20.2  0.184
#> 2     1  11.2  21.2  0.184
#> 3     2  11.2  21.2 -0.836
#> 4     3  14.6  24.6  1.60

# Inside `across()`: 6 normal variates (ncol * ngroup)
gdf %>% mutate(across(v1:v2, ~ .x + rnorm(1)))
#> # A tibble: 4 x 3
#> # Groups:   g [3]
#>       g    v1    v2
#>   <dbl> <dbl> <dbl>
#> 1     1  10.3  20.7
#> 2     1  11.3  21.7
#> 3     2  11.2  22.6
#> 4     3  13.5  22.7

See Also

c_across() for a function that returns a vector

Examples

# For better printing
iris <- as_tibble(iris)

# across() -----------------------------------------------------------------
# Different ways to select the same set of columns
# See <https://tidyselect.r-lib.org/articles/syntax.html> for details
iris %>%
  mutate(across(c(Sepal.Length, Sepal.Width), round))
iris %>%
  mutate(across(c(1, 2), round))
iris %>%
  mutate(across(1:Sepal.Width, round))
iris %>%
  mutate(across(where(is.double) & !c(Petal.Length, Petal.Width), round))

# Using an external vector of names
cols <- c("Sepal.Length", "Petal.Width")
iris %>%
  mutate(across(all_of(cols), round))

# If the external vector is named, the output columns will be named according
# to those names
names(cols) <- tolower(cols)
iris %>%
  mutate(across(all_of(cols), round))

# A purrr-style formula
iris %>%
  group_by(Species) %>%
  summarise(across(starts_with("Sepal"), ~ mean(.x, na.rm = TRUE)))

# A named list of functions
iris %>%
  group_by(Species) %>%
  summarise(across(starts_with("Sepal"), list(mean = mean, sd = sd)))

# Use the .names argument to control the output names
iris %>%
  group_by(Species) %>%
  summarise(across(starts_with("Sepal"), mean, .names = "mean_{.col}"))

iris %>%
  group_by(Species) %>%
  summarise(
    across(
      starts_with("Sepal"),
      list(mean = mean, sd = sd),
      .names = "{.col}.{.fn}"
    )
  )

# If a named external vector is used for column selection, .names will use
# those names when constructing the output names
iris %>%
  group_by(Species) %>%
  summarise(across(all_of(cols), mean, .names = "mean_{.col}"))

# When the list is not named, .fn is replaced by the function's position
iris %>%
  group_by(Species) %>%
  summarise(
    across(starts_with("Sepal"), list(mean, sd), .names = "{.col}.fn{.fn}")
  )

# When the functions in .fns return a data frame, you typically get a
# "packed" data frame back
quantile_df <- function(x, probs = c(0.25, 0.5, 0.75)) {
  tibble(quantile = probs, value = quantile(x, probs))
}

iris %>%
  reframe(across(starts_with("Sepal"), quantile_df))

# Use .unpack to automatically expand these packed data frames into their
# individual columns
iris %>%
  reframe(across(starts_with("Sepal"), quantile_df, .unpack = TRUE))

# .unpack can utilize a glue specification if you don't like the defaults
iris %>%
  reframe(
    across(starts_with("Sepal"), quantile_df, .unpack = "{outer}.{inner}")
  )

# This is also useful inside mutate(), for example, with a multi-lag helper
multilag <- function(x, lags = 1:3) {
  names(lags) <- as.character(lags)
  purrr::map_dfr(lags, lag, x = x)
}

iris %>%
  group_by(Species) %>%
  mutate(across(starts_with("Sepal"), multilag, .unpack = TRUE)) %>%
  select(Species, starts_with("Sepal"))

# if_any() and if_all() ----------------------------------------------------
iris %>%
  filter(if_any(ends_with("Width"), ~ . > 4))
iris %>%
  filter(if_all(ends_with("Width"), ~ . > 2))

Description

all_vars() and any_vars() were only needed for the scoped verbs, which have been superseded by the use of across() in an existing verb. See vignette("colwise") for details.

These quoting functions signal to scoped filtering verbs (e.g. filter_if() or filter_all()) that a predicate expression should be applied to all relevant variables. The all_vars() variant takes the intersection of the predicate expressions with & while the any_vars() variant takes the union with |.

Usage

all_vars(expr)

any_vars(expr)

Arguments

See Also

vars() for other quoting functions that you can use with scoped verbs.

Description

arrange() orders the rows of a data frame by the values of selected columns.

Unlike other dplyr verbs, arrange() largely ignores grouping; you need to explicitly mention grouping variables (or use .by_group = TRUE) in order to group by them, and functions of variables are evaluated once per data frame, not once per group.

Usage

arrange(.data, ..., .by_group = FALSE)

## S3 method for class 'data.frame'
arrange(.data, ..., .by_group = FALSE, .locale = NULL)

Arguments

Details

Missing values

Unlike base sorting with sort(), NA are:

• always sorted to the end for local data, even when wrapped with desc().

• treated differently for remote data, depending on the backend.

Value

An object of the same type as .data. The output has the following properties:

• All rows appear in the output, but (usually) in a different place.

• Columns are not modified.

• Groups are not modified.

• Data frame attributes are preserved.

Methods

This function is a generic, which means that packages can provide implementations (methods) for other classes. See the documentation of individual methods for extra arguments and differences in behaviour.

The following methods are currently available in loaded packages: no methods found.

See Also

Other single table verbs: filter(), mutate(), reframe(), rename(), select(), slice(), summarise()

Examples

arrange(mtcars, cyl, disp)
arrange(mtcars, desc(disp))

# grouped arrange ignores groups
by_cyl <- mtcars %>% group_by(cyl)
by_cyl %>% arrange(desc(wt))
# Unless you specifically ask:
by_cyl %>% arrange(desc(wt), .by_group = TRUE)

# use embracing when wrapping in a function;
# see ?rlang::args_data_masking for more details
tidy_eval_arrange <- function(.data, var) {
  .data %>%
    arrange({{ var }})
}
tidy_eval_arrange(mtcars, mpg)

# Use `across()` or `pick()` to select columns with tidy-select
iris %>% arrange(pick(starts_with("Sepal")))
iris %>% arrange(across(starts_with("Sepal"), desc))

Description

Copy tables to same source, if necessary

Usage

auto_copy(x, y, copy = FALSE, ...)

Arguments

Description

These data sets describe band members of the Beatles and Rolling Stones. They are toy data sets that can be displayed in their entirety on a slide (e.g. to demonstrate a join).

Usage

band_members

band_instruments

band_instruments2

Format

Each is a tibble with two variables and three observations

Details

band_instruments and band_instruments2 contain the same data but use different column names for the first column of the data set. band_instruments uses name, which matches the name of the key column of band_members; band_instruments2 uses artist, which does not.

Examples

band_members
band_instruments
band_instruments2

Description

This is a shortcut for x >= left & x <= right, implemented for local vectors and translated to the appropriate SQL for remote tables.

Usage

between(x, left, right, ..., ptype = NULL)

Arguments

Details

x, left, and right are all cast to their common type before the comparison is made. Use the ptype argument to specify the type manually.

Value

A logical vector the same size as x with a type determined by ptype.

See Also

join_by() if you are looking for documentation for the between() overlap join helper.

Examples

between(1:12, 7, 9)

x <- rnorm(1e2)
x[between(x, -1, 1)]

# On a tibble using `filter()`
filter(starwars, between(height, 100, 150))

# Using the `ptype` argument with ordered factors, where otherwise everything
# is cast to the common type of character before the comparison
x <- ordered(
  c("low", "medium", "high", "medium"),
  levels = c("low", "medium", "high")
)
between(x, "medium", "high")
between(x, "medium", "high", ptype = x)

Description

Bind any number of data frames by column, making a wider result. This is similar to do.call(cbind, dfs).

Where possible prefer using a join to combine multiple data frames. bind_cols() binds the rows in order in which they appear so it is easy to create meaningless results without realising it.

Usage

bind_cols(
  ...,
  .name_repair = c("unique", "universal", "check_unique", "minimal")
)

Arguments

Value

A data frame the same type as the first element of ....

Examples

df1 <- tibble(x = 1:3)
df2 <- tibble(y = 3:1)
bind_cols(df1, df2)

# Row sizes must be compatible when column-binding
try(bind_cols(tibble(x = 1:3), tibble(y = 1:2)))

Description

Bind any number of data frames by row, making a longer result. This is similar to do.call(rbind, dfs), but the output will contain all columns that appear in any of the inputs.

Usage

bind_rows(..., .id = NULL)

Arguments

Value

A data frame the same type as the first element of ....

Examples

df1 <- tibble(x = 1:2, y = letters[1:2])
df2 <- tibble(x = 4:5, z = 1:2)

# You can supply individual data frames as arguments:
bind_rows(df1, df2)

# Or a list of data frames:
bind_rows(list(df1, df2))

# When you supply a column name with the `.id` argument, a new
# column is created to link each row to its original data frame
bind_rows(list(df1, df2), .id = "id")
bind_rows(list(a = df1, b = df2), .id = "id")

Description

c_across() is designed to work with rowwise() to make it easy to perform row-wise aggregations. It has two differences from c():

• It uses tidy select semantics so you can easily select multiple variables. See vignette("rowwise") for more details.

• It uses vctrs::vec_c() in order to give safer outputs.

Usage

c_across(cols)

Arguments

See Also

across() for a function that returns a tibble.

Examples

df <- tibble(id = 1:4, w = runif(4), x = runif(4), y = runif(4), z = runif(4))
df %>%
  rowwise() %>%
  mutate(
    sum = sum(c_across(w:z)),
    sd = sd(c_across(w:z))
  )

Description

This function allows you to vectorise multiple switch() statements. Each case is evaluated sequentially and the first match for each element determines the corresponding value in the output vector. If no cases match, the .default is used.

case_match() is an R equivalent of the SQL "simple" ⁠CASE WHEN⁠ statement.

Connection to case_when()

While case_when() uses logical expressions on the left-hand side of the formula, case_match() uses values to match against .x with. The following two statements are roughly equivalent:

case_when(
  x %in% c("a", "b") ~ 1,
  x %in% "c" ~ 2,
  x %in% c("d", "e") ~ 3
)

case_match(
  x,
  c("a", "b") ~ 1,
  "c" ~ 2,
  c("d", "e") ~ 3
)

Usage

case_match(.x, ..., .default = NULL, .ptype = NULL)

Arguments

Value

A vector with the same size as .x and the same type as the common type of the RHS inputs and .default (if not overridden by .ptype).

See Also

case_when()

Examples

x <- c("a", "b", "a", "d", "b", NA, "c", "e")

# `case_match()` acts like a vectorized `switch()`.
# Unmatched values "fall through" as a missing value.
case_match(
  x,
  "a" ~ 1,
  "b" ~ 2,
  "c" ~ 3,
  "d" ~ 4
)

# Missing values can be matched exactly, and `.default` can be used to
# control the value used for unmatched values of `.x`
case_match(
  x,
  "a" ~ 1,
  "b" ~ 2,
  "c" ~ 3,
  "d" ~ 4,
  NA ~ 0,
  .default = 100
)

# Input values can be grouped into the same expression to map them to the
# same output value
case_match(
  x,
  c("a", "b") ~ "low",
  c("c", "d", "e") ~ "high"
)

# `case_match()` isn't limited to character input:
y <- c(1, 2, 1, 3, 1, NA, 2, 4)

case_match(
  y,
  c(1, 3) ~ "odd",
  c(2, 4) ~ "even",
  .default = "missing"
)

# Setting `.default` to the original vector is a useful way to replace
# selected values, leaving everything else as is
case_match(y, NA ~ 0, .default = y)

starwars %>%
  mutate(
    # Replace missings, but leave everything else alone
    hair_color = case_match(hair_color, NA ~ "unknown", .default = hair_color),
    # Replace some, but not all, of the species
    species = case_match(
      species,
      "Human" ~ "Humanoid",
      "Droid" ~ "Robot",
      c("Wookiee", "Ewok") ~ "Hairy",
      .default = species
    ),
    .keep = "used"
  )

Description

This function allows you to vectorise multiple if_else() statements. Each case is evaluated sequentially and the first match for each element determines the corresponding value in the output vector. If no cases match, the .default is used as a final "else" statment.

case_when() is an R equivalent of the SQL "searched" ⁠CASE WHEN⁠ statement.

Usage

case_when(..., .default = NULL, .ptype = NULL, .size = NULL)

Arguments

Value

A vector with the same size as the common size computed from the inputs in ... and the same type as the common type of the RHS inputs in ....

See Also

case_match()

Examples

x <- 1:70
case_when(
  x %% 35 == 0 ~ "fizz buzz",
  x %% 5 == 0 ~ "fizz",
  x %% 7 == 0 ~ "buzz",
  .default = as.character(x)
)

# Like an if statement, the arguments are evaluated in order, so you must
# proceed from the most specific to the most general. This won't work:
case_when(
  x %%  5 == 0 ~ "fizz",
  x %%  7 == 0 ~ "buzz",
  x %% 35 == 0 ~ "fizz buzz",
  .default = as.character(x)
)

# If none of the cases match and no `.default` is supplied, NA is used:
case_when(
  x %% 35 == 0 ~ "fizz buzz",
  x %% 5 == 0 ~ "fizz",
  x %% 7 == 0 ~ "buzz",
)

# Note that `NA` values on the LHS are treated like `FALSE` and will be
# assigned the `.default` value. You must handle them explicitly if you
# want to use a different value. The exact way to handle missing values is
# dependent on the set of LHS conditions you use.
x[2:4] <- NA_real_
case_when(
  x %% 35 == 0 ~ "fizz buzz",
  x %% 5 == 0 ~ "fizz",
  x %% 7 == 0 ~ "buzz",
  is.na(x) ~ "nope",
  .default = as.character(x)
)

# `case_when()` evaluates all RHS expressions, and then constructs its
# result by extracting the selected (via the LHS expressions) parts.
# In particular `NaN`s are produced in this case:
y <- seq(-2, 2, by = .5)
case_when(
  y >= 0 ~ sqrt(y),
  .default = y
)

# `case_when()` is particularly useful inside `mutate()` when you want to
# create a new variable that relies on a complex combination of existing
# variables
starwars %>%
  select(name:mass, gender, species) %>%
  mutate(
    type = case_when(
      height > 200 | mass > 200 ~ "large",
      species == "Droid" ~ "robot",
      .default = "other"
    )
  )


# `case_when()` is not a tidy eval function. If you'd like to reuse
# the same patterns, extract the `case_when()` call in a normal
# function:
case_character_type <- function(height, mass, species) {
  case_when(
    height > 200 | mass > 200 ~ "large",
    species == "Droid" ~ "robot",
    .default = "other"
  )
}

case_character_type(150, 250, "Droid")
case_character_type(150, 150, "Droid")

# Such functions can be used inside `mutate()` as well:
starwars %>%
  mutate(type = case_character_type(height, mass, species)) %>%
  pull(type)

# `case_when()` ignores `NULL` inputs. This is useful when you'd
# like to use a pattern only under certain conditions. Here we'll
# take advantage of the fact that `if` returns `NULL` when there is
# no `else` clause:
case_character_type <- function(height, mass, species, robots = TRUE) {
  case_when(
    height > 200 | mass > 200 ~ "large",
    if (robots) species == "Droid" ~ "robot",
    .default = "other"
  )
}

starwars %>%
  mutate(type = case_character_type(height, mass, species, robots = FALSE)) %>%
  pull(type)

Description

Given a set of vectors, coalesce() finds the first non-missing value at each position. It's inspired by the SQL COALESCE function which does the same thing for SQL NULLs.

Usage

coalesce(..., .ptype = NULL, .size = NULL)

Arguments

Value

A vector with the same type and size as the common type and common size of the vectors in ....

See Also

na_if() to replace specified values with an NA. tidyr::replace_na() to replace NA with a value.

Examples

# Use a single value to replace all missing values
x <- sample(c(1:5, NA, NA, NA))
coalesce(x, 0L)

# The equivalent to a missing value in a list is `NULL`
coalesce(list(1, 2, NULL), list(NA))

# Or generate a complete vector from partially missing pieces
y <- c(1, 2, NA, NA, 5)
z <- c(NA, NA, 3, 4, 5)
coalesce(y, z)

# Supply lists by splicing them into dots:
vecs <- list(
  c(1, 2, NA, NA, 5),
  c(NA, NA, 3, 4, 5)
)
coalesce(!!!vecs)

Description

compute() stores results in a remote temporary table. collect() retrieves data into a local tibble. collapse() is slightly different: it doesn't force computation, but instead forces generation of the SQL query. This is sometimes needed to work around bugs in dplyr's SQL generation.

All functions preserve grouping and ordering.

Usage

compute(x, ...)

collect(x, ...)

collapse(x, ...)

Arguments

Methods

These functions are generics, which means that packages can provide implementations (methods) for other classes. See the documentation of individual methods for extra arguments and differences in behaviour.

Methods available in currently loaded packages:

• compute(): no methods found

• collect(): no methods found

• collapse(): no methods found

See Also

copy_to(), the opposite of collect(): it takes a local data frame and uploads it to the remote source.

Examples

mtcars2 <- dbplyr::src_memdb() %>%
  copy_to(mtcars, name = "mtcars2-cc", overwrite = TRUE)

remote <- mtcars2 %>%
  filter(cyl == 8) %>%
  select(mpg:drat)

# Compute query and save in remote table
compute(remote)

# Compute query bring back to this session
collect(remote)

# Creates a fresh query based on the generated SQL
collapse(remote)

Description

consecutive_id() generates a unique identifier that increments every time a variable (or combination of variables) changes. Inspired by data.table::rleid().

Usage

consecutive_id(...)

Arguments

Value

A numeric vector the same length as the longest element of ....

Examples

consecutive_id(c(TRUE, TRUE, FALSE, FALSE, TRUE, FALSE, NA, NA))
consecutive_id(c(1, 1, 1, 2, 1, 1, 2, 2))

df <- data.frame(x = c(0, 0, 1, 0), y = c(2, 2, 2, 2))
df %>% group_by(x, y) %>% summarise(n = n())
df %>% group_by(id = consecutive_id(x, y), x, y) %>% summarise(n = n())

Description

These functions return information about the "current" group or "current" variable, so only work inside specific contexts like summarise() and mutate().

• n() gives the current group size.

• cur_group() gives the group keys, a tibble with one row and one column for each grouping variable.

• cur_group_id() gives a unique numeric identifier for the current group.

• cur_group_rows() gives the row indices for the current group.

• cur_column() gives the name of the current column (in across() only).

See group_data() for equivalent functions that return values for all groups.

See pick() for a way to select a subset of columns using tidyselect syntax while inside summarise() or mutate().

Usage

n()

cur_group()

cur_group_id()

cur_group_rows()

cur_column()

data.table

If you're familiar with data.table:

• cur_group_id() <-> .GRP

• cur_group() <-> .BY

• cur_group_rows() <-> .I

See pick() for an equivalent to .SD.

Examples

df <- tibble(
  g = sample(rep(letters[1:3], 1:3)),
  x = runif(6),
  y = runif(6)
)
gf <- df %>% group_by(g)

gf %>% summarise(n = n())

gf %>% mutate(id = cur_group_id())
gf %>% reframe(row = cur_group_rows())
gf %>% summarise(data = list(cur_group()))

gf %>% mutate(across(everything(), ~ paste(cur_column(), round(.x, 2))))

Description

This function uploads a local data frame into a remote data source, creating the table definition as needed. Wherever possible, the new object will be temporary, limited to the current connection to the source.

Usage

copy_to(dest, df, name = deparse(substitute(df)), overwrite = FALSE, ...)

Arguments

Value

a tbl object in the remote source

Methods

This function is a generic, which means that packages can provide implementations (methods) for other classes. See the documentation of individual methods for extra arguments and differences in behaviour.

The following methods are currently available in loaded packages: no methods found.

See Also

collect() for the opposite action; downloading remote data into a local dbl.

Examples

## Not run: 
iris2 <- dbplyr::src_memdb() %>% copy_to(iris, overwrite = TRUE)
iris2

## End(Not run)

Description

count() lets you quickly count the unique values of one or more variables: df %>% count(a, b) is roughly equivalent to df %>% group_by(a, b) %>% summarise(n = n()). count() is paired with tally(), a lower-level helper that is equivalent to df %>% summarise(n = n()). Supply wt to perform weighted counts, switching the summary from n = n() to n = sum(wt).

add_count() and add_tally() are equivalents to count() and tally() but use mutate() instead of summarise() so that they add a new column with group-wise counts.

Usage

count(x, ..., wt = NULL, sort = FALSE, name = NULL)

## S3 method for class 'data.frame'
count(
  x,
  ...,
  wt = NULL,
  sort = FALSE,
  name = NULL,
  .drop = group_by_drop_default(x)
)

tally(x, wt = NULL, sort = FALSE, name = NULL)

add_count(x, ..., wt = NULL, sort = FALSE, name = NULL, .drop = deprecated())

add_tally(x, wt = NULL, sort = FALSE, name = NULL)

Arguments

Value

An object of the same type as .data. count() and add_count() group transiently, so the output has the same groups as the input.

Examples

# count() is a convenient way to get a sense of the distribution of
# values in a dataset
starwars %>% count(species)
starwars %>% count(species, sort = TRUE)
starwars %>% count(sex, gender, sort = TRUE)
starwars %>% count(birth_decade = round(birth_year, -1))

# use the `wt` argument to perform a weighted count. This is useful
# when the data has already been aggregated once
df <- tribble(
  ~name,    ~gender,   ~runs,
  "Max",    "male",       10,
  "Sandra", "female",      1,
  "Susan",  "female",      4
)
# counts rows:
df %>% count(gender)
# counts runs:
df %>% count(gender, wt = runs)

# When factors are involved, `.drop = FALSE` can be used to retain factor
# levels that don't appear in the data
df2 <- tibble(
  id = 1:5,
  type = factor(c("a", "c", "a", NA, "a"), levels = c("a", "b", "c"))
)
df2 %>% count(type)
df2 %>% count(type, .drop = FALSE)

# Or, using `group_by()`:
df2 %>% group_by(type, .drop = FALSE) %>% count()

# tally() is a lower-level function that assumes you've done the grouping
starwars %>% tally()
starwars %>% group_by(species) %>% tally()

# both count() and tally() have add_ variants that work like
# mutate() instead of summarise
df %>% add_count(gender, wt = runs)
df %>% add_tally(wt = runs)

Description

Cross joins match each row in x to every row in y, resulting in a data frame with nrow(x) * nrow(y) rows.

Since cross joins result in all possible matches between x and y, they technically serve as the basis for all mutating joins, which can generally be thought of as cross joins followed by a filter. In practice, a more specialized procedure is used for better performance.

Usage

cross_join(x, y, ..., copy = FALSE, suffix = c(".x", ".y"))

Arguments

Value

An object of the same type as x (including the same groups). The output has the following properties:

• There are nrow(x) * nrow(y) rows returned.

• Output columns include all columns from both x and y. Column name collisions are resolved using suffix.

• The order of the rows and columns of x is preserved as much as possible.

Methods

This function is a generic, which means that packages can provide implementations (methods) for other classes. See the documentation of individual methods for extra arguments and differences in behaviour.

The following methods are currently available in loaded packages: no methods found.

See Also

Other joins: filter-joins, mutate-joins, nest_join()

Examples

# Cross joins match each row in `x` to every row in `y`.
# Data within the columns is not used in the matching process.
cross_join(band_instruments, band_members)

# Control the suffix added to variables duplicated in
# `x` and `y` with `suffix`.
cross_join(band_instruments, band_members, suffix = c("", "_y"))

Description

dplyr provides cumall(), cumany(), and cummean() to complete R's set of cumulative functions.

Usage

cumall(x)

cumany(x)

cummean(x)

Arguments

Value

A vector the same length as x.

Cumulative logical functions

These are particularly useful in conjunction with filter():

• cumall(x): all cases until the first FALSE.

• cumall(!x): all cases until the first TRUE.

• cumany(x): all cases after the first TRUE.

• cumany(!x): all cases after the first FALSE.

Examples

# `cummean()` returns a numeric/integer vector of the same length
# as the input vector.
x <- c(1, 3, 5, 2, 2)
cummean(x)
cumsum(x) / seq_along(x)

# `cumall()` and `cumany()` return logicals
cumall(x < 5)
cumany(x == 3)

# `cumall()` vs. `cumany()`
df <- data.frame(
  date = as.Date("2020-01-01") + 0:6,
  balance = c(100, 50, 25, -25, -50, 30, 120)
)
# all rows after first overdraft
df %>% filter(cumany(balance < 0))
# all rows until first overdraft
df %>% filter(cumall(!(balance < 0)))

Description

Transform a vector into a format that will be sorted in descending order. This is useful within arrange().

Usage

desc(x)

Arguments

Examples

desc(1:10)
desc(factor(letters))

first_day <- seq(as.Date("1910/1/1"), as.Date("1920/1/1"), "years")
desc(first_day)

starwars %>% arrange(desc(mass))

Description

Keep only unique/distinct rows from a data frame. This is similar to unique.data.frame() but considerably faster.

Usage

distinct(.data, ..., .keep_all = FALSE)

Arguments

Value

An object of the same type as .data. The output has the following properties:

• Rows are a subset of the input but appear in the same order.

• Columns are not modified if ... is empty or .keep_all is TRUE. Otherwise, distinct() first calls mutate() to create new columns.

• Groups are not modified.

• Data frame attributes are preserved.

Methods

This function is a generic, which means that packages can provide implementations (methods) for other classes. See the documentation of individual methods for extra arguments and differences in behaviour.

The following methods are currently available in loaded packages: no methods found.

Examples

df <- tibble(
  x = sample(10, 100, rep = TRUE),
  y = sample(10, 100, rep = TRUE)
)
nrow(df)
nrow(distinct(df))
nrow(distinct(df, x, y))

distinct(df, x)
distinct(df, y)

# You can choose to keep all other variables as well
distinct(df, x, .keep_all = TRUE)
distinct(df, y, .keep_all = TRUE)

# You can also use distinct on computed variables
distinct(df, diff = abs(x - y))

# Use `pick()` to select columns with tidy-select
distinct(starwars, pick(contains("color")))

# Grouping -------------------------------------------------

df <- tibble(
  g = c(1, 1, 2, 2, 2),
  x = c(1, 1, 2, 1, 2),
  y = c(3, 2, 1, 3, 1)
)
df <- df %>% group_by(g)

# With grouped data frames, distinctness is computed within each group
df %>% distinct(x)

# When `...` are omitted, `distinct()` still computes distinctness using
# all variables in the data frame
df %>% distinct()

Description

There are two ways to group in dplyr:

• Persistent grouping with group_by()

• Per-operation grouping with .by/by

This help page is dedicated to explaining where and why you might want to use the latter.

Depending on the dplyr verb, the per-operation grouping argument may be named .by or by. The Supported verbs section below outlines this on a case-by-case basis. The remainder of this page will refer to .by for simplicity.

Grouping radically affects the computation of the dplyr verb you use it with, and one of the goals of .by is to allow you to place that grouping specification alongside the code that actually uses it. As an added benefit, with .by you no longer need to remember to ungroup() after summarise(), and summarise() won't ever message you about how it's handling the groups!

This idea comes from data.table, which allows you to specify by alongside modifications in j, like: dt[, .(x = mean(x)), by = g].

Supported verbs

• mutate(.by = )

• summarise(.by = )

• reframe(.by = )

• filter(.by = )

• slice(.by = )

• slice_head(by = ) and slice_tail(by = )

• slice_min(by = ) and slice_max(by = )

• slice_sample(by = )

Note that some dplyr verbs use by while others use .by. This is a purely technical difference.

Differences between .by and group_by()

Using .by

Let's take a look at the two grouping approaches using this expenses data set, which tracks costs accumulated across various ids and regions:

expenses <- tibble(
  id = c(1, 2, 1, 3, 1, 2, 3),
  region = c("A", "A", "A", "B", "B", "A", "A"),
  cost = c(25, 20, 19, 12, 9, 6, 6)
)
expenses
#> # A tibble: 7 x 3
#>      id region  cost
#>   <dbl> <chr>  <dbl>
#> 1     1 A         25
#> 2     2 A         20
#> 3     1 A         19
#> 4     3 B         12
#> 5     1 B          9
#> 6     2 A          6
#> 7     3 A          6

Imagine that you wanted to compute the average cost per region. You'd probably write something like this:

expenses %>%
  group_by(region) %>%
  summarise(cost = mean(cost))
#> # A tibble: 2 x 2
#>   region  cost
#>   <chr>  <dbl>
#> 1 A       15.2
#> 2 B       10.5

Instead, you can now specify the grouping inline within the verb:

expenses %>%
  summarise(cost = mean(cost), .by = region)
#> # A tibble: 2 x 2
#>   region  cost
#>   <chr>  <dbl>
#> 1 A       15.2
#> 2 B       10.5

.by applies to a single operation, meaning that since expenses was an ungrouped data frame, the result after applying .by will also always be an ungrouped data frame, regardless of the number of grouping columns.

expenses %>%
  summarise(cost = mean(cost), .by = c(id, region))
#> # A tibble: 5 x 3
#>      id region  cost
#>   <dbl> <chr>  <dbl>
#> 1     1 A         22
#> 2     2 A         13
#> 3     3 B         12
#> 4     1 B          9
#> 5     3 A          6

Compare that with group_by() %>% summarise(), where summarise() generally peels off 1 layer of grouping by default, typically with a message that it is doing so:

expenses %>%
  group_by(id, region) %>%
  summarise(cost = mean(cost))
#> `summarise()` has grouped output by 'id'. You can override using the `.groups`
#> argument.
#> # A tibble: 5 x 3
#> # Groups:   id [3]
#>      id region  cost
#>   <dbl> <chr>  <dbl>
#> 1     1 A         22
#> 2     1 B          9
#> 3     2 A         13
#> 4     3 A          6
#> 5     3 B         12

Because .by grouping applies to a single operation, you don't need to worry about ungrouping, and it never needs to emit a message to remind you what it is doing with the groups.

Note that with .by we specified multiple columns to group by using the tidy-select syntax c(id, region). If you have a character vector of column names you'd like to group by, you can do so with .by = all_of(my_cols). It will group by the columns in the order they were provided.

To prevent surprising results, you can't use .by on an existing grouped data frame:

expenses %>% 
  group_by(id) %>%
  summarise(cost = mean(cost), .by = c(id, region))
#> Error in `summarise()`:
#> ! Can't supply `.by` when `.data` is a grouped data frame.

So far we've focused on the usage of .by with summarise(), but .by works with a number of other dplyr verbs. For example, you could append the mean cost per region onto the original data frame as a new column rather than computing a summary:

expenses %>%
  mutate(cost_by_region = mean(cost), .by = region)
#> # A tibble: 7 x 4
#>      id region  cost cost_by_region
#>   <dbl> <chr>  <dbl>          <dbl>
#> 1     1 A         25           15.2
#> 2     2 A         20           15.2
#> 3     1 A         19           15.2
#> 4     3 B         12           10.5
#> 5     1 B          9           10.5
#> 6     2 A          6           15.2
#> 7     3 A          6           15.2

Or you could slice out the maximum cost per combination of id and region:

# Note that the argument is named `by` in `slice_max()`
expenses %>%
  slice_max(cost, n = 1, by = c(id, region))
#> # A tibble: 5 x 3
#>      id region  cost
#>   <dbl> <chr>  <dbl>
#> 1     1 A         25
#> 2     2 A         20
#> 3     3 B         12
#> 4     1 B          9
#> 5     3 A          6

Result ordering

When used with .by, summarise(), reframe(), and slice() all maintain the ordering of the existing data. This is different from group_by(), which has always sorted the group keys in ascending order.

df <- tibble(
  month = c("jan", "jan", "feb", "feb", "mar"),
  temp = c(20, 25, 18, 20, 40)
)

# Uses ordering by "first appearance" in the original data
df %>%
  summarise(average_temp = mean(temp), .by = month)
#> # A tibble: 3 x 2
#>   month average_temp
#>   <chr>        <dbl>
#> 1 jan           22.5
#> 2 feb           19  
#> 3 mar           40

# Sorts in ascending order
df %>%
  group_by(month) %>%
  summarise(average_temp = mean(temp))
#> # A tibble: 3 x 2
#>   month average_temp
#>   <chr>        <dbl>
#> 1 feb           19  
#> 2 jan           22.5
#> 3 mar           40

If you need sorted group keys, we recommend that you explicitly use arrange() either before or after the call to summarise(), reframe(), or slice(). This also gives you full access to all of arrange()'s features, such as desc() and the .locale argument.

Verbs without .by support

If a dplyr verb doesn't support .by, then that typically means that the verb isn't inherently affected by grouping. For example, pull() and rename() don't support .by, because specifying columns to group by would not affect their implementations.

That said, there are a few exceptions to this where sometimes a dplyr verb doesn't support .by, but does have special support for grouped data frames created by group_by(). This is typically because the verbs are required to retain the grouping columns, for example:

• select() always retains grouping columns, with a message if any aren't specified in the select() call.

• distinct() and count() place unspecified grouping columns at the front of the data frame before computing their results.

• arrange() has a .by_group argument to optionally order by grouping columns first.

If group_by() didn't exist, then these verbs would not have special support for grouped data frames.

Description

This is a generic function which gives more details about an object than print(), and is more focused on human readable output than str().

Usage

explain(x, ...)

show_query(x, ...)

Arguments

Value

The first argument, invisibly.

Databases

Explaining a tbl_sql will run the SQL EXPLAIN command which will describe the query plan. This requires a little bit of knowledge about how EXPLAIN works for your database, but is very useful for diagnosing performance problems.

Examples

lahman_s <- dbplyr::lahman_sqlite()
batting <- tbl(lahman_s, "Batting")
batting %>% show_query()
batting %>% explain()

# The batting database has indices on all ID variables:
# SQLite automatically picks the most restrictive index
batting %>% filter(lgID == "NL" & yearID == 2000L) %>% explain()

# OR's will use multiple indexes
batting %>% filter(lgID == "NL" | yearID == 2000) %>% explain()

# Joins will use indexes in both tables
teams <- tbl(lahman_s, "Teams")
batting %>% left_join(teams, c("yearID", "teamID")) %>% explain()

Description

The filter() function is used to subset a data frame, retaining all rows that satisfy your conditions. To be retained, the row must produce a value of TRUE for all conditions. Note that when a condition evaluates to NA the row will be dropped, unlike base subsetting with [.

Usage

filter(.data, ..., .by = NULL, .preserve = FALSE)

Arguments

Details

The filter() function is used to subset the rows of .data, applying the expressions in ... to the column values to determine which rows should be retained. It can be applied to both grouped and ungrouped data (see group_by() and ungroup()). However, dplyr is not yet smart enough to optimise the filtering operation on grouped datasets that do not need grouped calculations. For this reason, filtering is often considerably faster on ungrouped data.

Value

An object of the same type as .data. The output has the following properties:

• Rows are a subset of the input, but appear in the same order.

• Columns are not modified.

• The number of groups may be reduced (if .preserve is not TRUE).

• Data frame attributes are preserved.

Useful filter functions

There are many functions and operators that are useful when constructing the expressions used to filter the data:

• ==, >, >= etc

• &, |, !, xor()

• is.na()

• between(), near()

Grouped tibbles

Because filtering expressions are computed within groups, they may yield different results on grouped tibbles. This will be the case as soon as an aggregating, lagging, or ranking function is involved. Compare this ungrouped filtering:

starwars %>% filter(mass > mean(mass, na.rm = TRUE))

With the grouped equivalent:

starwars %>% group_by(gender) %>% filter(mass > mean(mass, na.rm = TRUE))

In the ungrouped version, filter() compares the value of mass in each row to the global average (taken over the whole data set), keeping only the rows with mass greater than this global average. In contrast, the grouped version calculates the average mass separately for each gender group, and keeps rows with mass greater than the relevant within-gender average.

Methods

This function is a generic, which means that packages can provide implementations (methods) for other classes. See the documentation of individual methods for extra arguments and differences in behaviour.

The following methods are currently available in loaded packages: no methods found.

See Also

Other single table verbs: arrange(), mutate(), reframe(), rename(), select(), slice(), summarise()

Examples

# Filtering by one criterion
filter(starwars, species == "Human")
filter(starwars, mass > 1000)

# Filtering by multiple criteria within a single logical expression
filter(starwars, hair_color == "none" & eye_color == "black")
filter(starwars, hair_color == "none" | eye_color == "black")

# When multiple expressions are used, they are combined using &
filter(starwars, hair_color == "none", eye_color == "black")


# The filtering operation may yield different results on grouped
# tibbles because the expressions are computed within groups.
#
# The following filters rows where `mass` is greater than the
# global average:
starwars %>% filter(mass > mean(mass, na.rm = TRUE))

# Whereas this keeps rows with `mass` greater than the gender
# average:
starwars %>% group_by(gender) %>% filter(mass > mean(mass, na.rm = TRUE))


# To refer to column names that are stored as strings, use the `.data` pronoun:
vars <- c("mass", "height")
cond <- c(80, 150)
starwars %>%
  filter(
    .data[[vars[[1]]]] > cond[[1]],
    .data[[vars[[2]]]] > cond[[2]]
  )
# Learn more in ?rlang::args_data_masking

Description

Filtering joins filter rows from x based on the presence or absence of matches in y:

• semi_join() return all rows from x with a match in y.

• anti_join() return all rows from x without a match in y.

Usage

semi_join(x, y, by = NULL, copy = FALSE, ...)

## S3 method for class 'data.frame'
semi_join(x, y, by = NULL, copy = FALSE, ..., na_matches = c("na", "never"))

anti_join(x, y, by = NULL, copy = FALSE, ...)

## S3 method for class 'data.frame'
anti_join(x, y, by = NULL, copy = FALSE, ..., na_matches = c("na", "never"))

Arguments

Value

An object of the same type as x. The output has the following properties:

• Rows are a subset of the input, but appear in the same order.

• Columns are not modified.

• Data frame attributes are preserved.

• Groups are taken from x. The number of groups may be reduced.

Methods

These function are generics, which means that packages can provide implementations (methods) for other classes. See the documentation of individual methods for extra arguments and differences in behaviour.

Methods available in currently loaded packages:

• semi_join(): no methods found.

• anti_join(): no methods found.

See Also

Other joins: cross_join(), mutate-joins, nest_join()

Examples

# "Filtering" joins keep cases from the LHS
band_members %>% semi_join(band_instruments)
band_members %>% anti_join(band_instruments)

# To suppress the message about joining variables, supply `by`
band_members %>% semi_join(band_instruments, by = join_by(name))
# This is good practice in production code

Description

glimpse() is like a transposed version of print(): columns run down the page, and data runs across. This makes it possible to see every column in a data frame. It's a little like str() applied to a data frame but it tries to show you as much data as possible. (And it always shows the underlying data, even when applied to a remote data source.)

glimpse() is provided by the pillar package, and re-exported by dplyr. See pillar::glimpse() for more details.

Value

x original x is (invisibly) returned, allowing glimpse() to be used within a data pipeline.

Examples

glimpse(mtcars)

# Note that original x is (invisibly) returned, allowing `glimpse()` to be
# used within a pipeline.
mtcars %>%
  glimpse() %>%
  select(1:3)

glimpse(starwars)

Description

Most data operations are done on groups defined by variables. group_by() takes an existing tbl and converts it into a grouped tbl where operations are performed "by group". ungroup() removes grouping.

Usage

group_by(.data, ..., .add = FALSE, .drop = group_by_drop_default(.data))

ungroup(x, ...)

Arguments

Value

A grouped data frame with class grouped_df, unless the combination of ... and add yields a empty set of grouping columns, in which case a tibble will be returned.

Methods

These function are generics, which means that packages can provide implementations (methods) for other classes. See the documentation of individual methods for extra arguments and differences in behaviour.

Methods available in currently loaded packages:

• group_by(): no methods found.

• ungroup(): no methods found.

Ordering

Currently, group_by() internally orders the groups in ascending order. This results in ordered output from functions that aggregate groups, such as summarise().

When used as grouping columns, character vectors are ordered in the C locale for performance and reproducibility across R sessions. If the resulting ordering of your grouped operation matters and is dependent on the locale, you should follow up the grouped operation with an explicit call to arrange() and set the .locale argument. For example:

data %>%
  group_by(chr) %>%
  summarise(avg = mean(x)) %>%
  arrange(chr, .locale = "en")

This is often useful as a preliminary step before generating content intended for humans, such as an HTML table.

Legacy behavior

Prior to dplyr 1.1.0, character vector grouping columns were ordered in the system locale. If you need to temporarily revert to this behavior, you can set the global option dplyr.legacy_locale to TRUE, but this should be used sparingly and you should expect this option to be removed in a future version of dplyr. It is better to update existing code to explicitly call arrange(.locale = ) instead. Note that setting dplyr.legacy_locale will also force calls to arrange() to use the system locale.

See Also

Other grouping functions: group_map(), group_nest(), group_split(), group_trim()

Examples

by_cyl <- mtcars %>% group_by(cyl)

# grouping doesn't change how the data looks (apart from listing
# how it's grouped):
by_cyl

# It changes how it acts with the other dplyr verbs:
by_cyl %>% summarise(
  disp = mean(disp),
  hp = mean(hp)
)
by_cyl %>% filter(disp == max(disp))

# Each call to summarise() removes a layer of grouping
by_vs_am <- mtcars %>% group_by(vs, am)
by_vs <- by_vs_am %>% summarise(n = n())
by_vs
by_vs %>% summarise(n = sum(n))

# To removing grouping, use ungroup
by_vs %>%
  ungroup() %>%
  summarise(n = sum(n))

# By default, group_by() overrides existing grouping
by_cyl %>%
  group_by(vs, am) %>%
  group_vars()

# Use add = TRUE to instead append
by_cyl %>%
  group_by(vs, am, .add = TRUE) %>%
  group_vars()

# You can group by expressions: this is a short-hand
# for a mutate() followed by a group_by()
mtcars %>%
  group_by(vsam = vs + am)

# The implicit mutate() step is always performed on the
# ungrouped data. Here we get 3 groups:
mtcars %>%
  group_by(vs) %>%
  group_by(hp_cut = cut(hp, 3))

# If you want it to be performed by groups,
# you have to use an explicit mutate() call.
# Here we get 3 groups per value of vs
mtcars %>%
  group_by(vs) %>%
  mutate(hp_cut = cut(hp, 3)) %>%
  group_by(hp_cut)

# when factors are involved and .drop = FALSE, groups can be empty
tbl <- tibble(
  x = 1:10,
  y = factor(rep(c("a", "c"), each  = 5), levels = c("a", "b", "c"))
)
tbl %>%
  group_by(y, .drop = FALSE) %>%
  group_rows()

Description

This selection helpers matches grouping variables. It can be used in select() or vars() selections.

Usage

group_cols(vars = NULL, data = NULL)

Arguments

See Also

groups() and group_vars() for retrieving the grouping variables outside selection contexts.

Examples

gdf <- iris %>% group_by(Species)
gdf %>% select(group_cols())

# Remove the grouping variables from mutate selections:
gdf %>% mutate_at(vars(-group_cols()), `/`, 100)
# -> No longer necessary with across()
gdf %>% mutate(across(everything(), ~ . / 100))

Description

group_map(), group_modify() and group_walk() are purrr-style functions that can be used to iterate on grouped tibbles.

Usage

group_map(.data, .f, ..., .keep = FALSE)

group_modify(.data, .f, ..., .keep = FALSE)

group_walk(.data, .f, ..., .keep = FALSE)

Arguments

Details

Use group_modify() when summarize() is too limited, in terms of what you need to do and return for each group. group_modify() is good for "data frame in, data frame out". If that is too limited, you need to use a nested or split workflow. group_modify() is an evolution of do(), if you have used that before.

Each conceptual group of the data frame is exposed to the function .f with two pieces of information:

• The subset of the data for the group, exposed as .x.

• The key, a tibble with exactly one row and columns for each grouping variable, exposed as .y.

For completeness, group_modify(), group_map and group_walk() also work on ungrouped data frames, in that case the function is applied to the entire data frame (exposed as .x), and .y is a one row tibble with no column, consistently with group_keys().

Value

• group_modify() returns a grouped tibble. In that case .f must return a data frame.

• group_map() returns a list of results from calling .f on each group.

• group_walk() calls .f for side effects and returns the input .tbl, invisibly.

See Also

Other grouping functions: group_by(), group_nest(), group_split(), group_trim()

Examples

# return a list
mtcars %>%
  group_by(cyl) %>%
  group_map(~ head(.x, 2L))

# return a tibble grouped by `cyl` with 2 rows per group
# the grouping data is recalculated
mtcars %>%
  group_by(cyl) %>%
  group_modify(~ head(.x, 2L))


# a list of tibbles
iris %>%
  group_by(Species) %>%
  group_map(~ broom::tidy(lm(Petal.Length ~ Sepal.Length, data = .x)))

# a restructured grouped tibble
iris %>%
  group_by(Species) %>%
  group_modify(~ broom::tidy(lm(Petal.Length ~ Sepal.Length, data = .x)))


# a list of vectors
iris %>%
  group_by(Species) %>%
  group_map(~ quantile(.x$Petal.Length, probs = c(0.25, 0.5, 0.75)))

# to use group_modify() the lambda must return a data frame
iris %>%
  group_by(Species) %>%
  group_modify(~ {
     quantile(.x$Petal.Length, probs = c(0.25, 0.5, 0.75)) %>%
     tibble::enframe(name = "prob", value = "quantile")
  })

iris %>%
  group_by(Species) %>%
  group_modify(~ {
    .x %>%
      purrr::map_dfc(fivenum) %>%
      mutate(nms = c("min", "Q1", "median", "Q3", "max"))
  })

# group_walk() is for side effects
dir.create(temp <- tempfile())
iris %>%
  group_by(Species) %>%
  group_walk(~ write.csv(.x, file = file.path(temp, paste0(.y$Species, ".csv"))))
list.files(temp, pattern = "csv$")
unlink(temp, recursive = TRUE)

# group_modify() and ungrouped data frames
mtcars %>%
  group_modify(~ head(.x, 2L))

Description

Drop unused levels of all factors that are used as grouping variables, then recalculates the grouping structure.

group_trim() is particularly useful after a filter() that is intended to select a subset of groups.

Usage

group_trim(.tbl, .drop = group_by_drop_default(.tbl))

Arguments

Value

A grouped data frame

See Also

Other grouping functions: group_by(), group_map(), group_nest(), group_split()

Examples

iris %>%
  group_by(Species) %>%
  filter(Species == "setosa", .preserve = TRUE) %>%
  group_trim()

Description

ident() takes strings and turns them as database identifiers (e.g. table or column names) quoting them using the identifer rules for your database. ident_q() does the same, but assumes the names have already been quoted, preventing them from being quoted again.

These are generally for internal use only; if you need to supply an table name that is qualified with schema or catalog, or has already been quoted for some other reason, use I().

Usage

ident(...)

Arguments

Examples

# Identifiers are escaped with "

ident("x")

Description

if_else() is a vectorized if-else. Compared to the base R equivalent, ifelse(), this function allows you to handle missing values in the condition with missing and always takes true, false, and missing into account when determining what the output type should be.

Usage

if_else(condition, true, false, missing = NULL, ..., ptype = NULL, size = NULL)

Arguments

Value

A vector with the same size as condition and the same type as the common type of true, false, and missing.

Where condition is TRUE, the matching values from true, where it is FALSE, the matching values from false, and where it is NA, the matching values from missing, if provided, otherwise a missing value will be used.

Examples

x <- c(-5:5, NA)
if_else(x < 0, NA, x)

# Explicitly handle `NA` values in the `condition` with `missing`
if_else(x < 0, "negative", "positive", missing = "missing")

# Unlike `ifelse()`, `if_else()` preserves types
x <- factor(sample(letters[1:5], 10, replace = TRUE))
ifelse(x %in% c("a", "b", "c"), x, NA)
if_else(x %in% c("a", "b", "c"), x, NA)

# `if_else()` is often useful for creating new columns inside of `mutate()`
starwars %>%
  mutate(category = if_else(height < 100, "short", "tall"), .keep = "used")

Description

join_by() constructs a specification that describes how to join two tables using a small domain specific language. The result can be supplied as the by argument to any of the join functions (such as left_join()).

Usage

join_by(...)

Arguments

Join types

The following types of joins are supported by dplyr:

• Equality joins

• Inequality joins

• Rolling joins

• Overlap joins

• Cross joins

Equality, inequality, rolling, and overlap joins are discussed in more detail below. Cross joins are implemented through cross_join().

Equality joins

Equality joins require keys to be equal between one or more pairs of columns, and are the most common type of join. To construct an equality join using join_by(), supply two column names to join with separated by ==. Alternatively, supplying a single name will be interpreted as an equality join between two columns of the same name. For example, join_by(x) is equivalent to join_by(x == x).

Inequality joins

Inequality joins match on an inequality, such as >, >=, <, or <=, and are common in time series analysis and genomics. To construct an inequality join using join_by(), supply two column names separated by one of the above mentioned inequalities.

Note that inequality joins will match a single row in x to a potentially large number of rows in y. Be extra careful when constructing inequality join specifications!

Rolling joins

Rolling joins are a variant of inequality joins that limit the results returned from an inequality join condition. They are useful for "rolling" the closest match forward/backwards when there isn't an exact match. To construct a rolling join, wrap an inequality with closest().

• closest(expr)

  expr must be an inequality involving one of: >, >=, <, or <=.

  For example, closest(x >= y) is interpreted as: For each value in x, find the closest value in y that is less than or equal to that x value.

closest() will always use the left-hand table (x) as the primary table, and the right-hand table (y) as the one to find the closest match in, regardless of how the inequality is specified. For example, closest(y$a >= x$b) will always be interpreted as closest(x$b <= y$a).

Overlap joins

Overlap joins are a special case of inequality joins involving one or two columns from the left-hand table overlapping a range defined by two columns from the right-hand table. There are three helpers that join_by() recognizes to assist with constructing overlap joins, all of which can be constructed from simpler inequalities.

• between(x, y_lower, y_upper, ..., bounds = "[]")

  For each value in x, this finds everywhere that value falls between ⁠[y_lower, y_upper]⁠. Equivalent to ⁠x >= y_lower, x <= y_upper⁠ by default.

  bounds can be one of "[]", "[)", "(]", or "()" to alter the inclusiveness of the lower and upper bounds. This changes whether >= or > and <= or < are used to build the inequalities shown above.

  Dots are for future extensions and must be empty.

• within(x_lower, x_upper, y_lower, y_upper)

  For each range in ⁠[x_lower, x_upper]⁠, this finds everywhere that range falls completely within ⁠[y_lower, y_upper]⁠. Equivalent to ⁠x_lower >= y_lower, x_upper <= y_upper⁠.

  The inequalities used to build within() are the same regardless of the inclusiveness of the supplied ranges.

• overlaps(x_lower, x_upper, y_lower, y_upper, ..., bounds = "[]")

  For each range in ⁠[x_lower, x_upper]⁠, this finds everywhere that range overlaps ⁠[y_lower, y_upper]⁠ in any capacity. Equivalent to ⁠x_lower <= y_upper, x_upper >= y_lower⁠ by default.

  bounds can be one of "[]", "[)", "(]", or "()" to alter the inclusiveness of the lower and upper bounds. "[]" uses <= and >=, but the 3 other options use < and > and generate the exact same inequalities.

  Dots are for future extensions and must be empty.

These conditions assume that the ranges are well-formed and non-empty, i.e. x_lower <= x_upper when bounds are treated as "[]", and x_lower < x_upper otherwise.

Column referencing

When specifying join conditions, join_by() assumes that column names on the left-hand side of the condition refer to the left-hand table (x), and names on the right-hand side of the condition refer to the right-hand table (y). Occasionally, it is clearer to be able to specify a right-hand table name on the left-hand side of the condition, and vice versa. To support this, column names can be prefixed by ⁠x$⁠ or ⁠y$⁠ to explicitly specify which table they come from.

Examples

sales <- tibble(
  id = c(1L, 1L, 1L, 2L, 2L),
  sale_date = as.Date(c("2018-12-31", "2019-01-02", "2019-01-05", "2019-01-04", "2019-01-01"))
)
sales

promos <- tibble(
  id = c(1L, 1L, 2L),
  promo_date = as.Date(c("2019-01-01", "2019-01-05", "2019-01-02"))
)
promos

# Match `id` to `id`, and `sale_date` to `promo_date`
by <- join_by(id, sale_date == promo_date)
left_join(sales, promos, by)

# For each `sale_date` within a particular `id`,
# find all `promo_date`s that occurred before that particular sale
by <- join_by(id, sale_date >= promo_date)
left_join(sales, promos, by)

# For each `sale_date` within a particular `id`,
# find only the closest `promo_date` that occurred before that sale
by <- join_by(id, closest(sale_date >= promo_date))
left_join(sales, promos, by)

# If you want to disallow exact matching in rolling joins, use `>` rather
# than `>=`. Note that the promo on `2019-01-05` is no longer considered the
# closest match for the sale on the same date.
by <- join_by(id, closest(sale_date > promo_date))
left_join(sales, promos, by)

# Same as before, but also require that the promo had to occur at most 1
# day before the sale was made. We'll use a full join to see that id 2's
# promo on `2019-01-02` is no longer matched to the sale on `2019-01-04`.
sales <- mutate(sales, sale_date_lower = sale_date - 1)
by <- join_by(id, closest(sale_date >= promo_date), sale_date_lower <= promo_date)
full_join(sales, promos, by)

# ---------------------------------------------------------------------------

segments <- tibble(
  segment_id = 1:4,
  chromosome = c("chr1", "chr2", "chr2", "chr1"),
  start = c(140, 210, 380, 230),
  end = c(150, 240, 415, 280)
)
segments

reference <- tibble(
  reference_id = 1:4,
  chromosome = c("chr1", "chr1", "chr2", "chr2"),
  start = c(100, 200, 300, 415),
  end = c(150, 250, 399, 450)
)
reference

# Find every time a segment `start` falls between the reference
# `[start, end]` range.
by <- join_by(chromosome, between(start, start, end))
full_join(segments, reference, by)

# If you wanted the reference columns first, supply `reference` as `x`
# and `segments` as `y`, then explicitly refer to their columns using `x$`
# and `y$`.
by <- join_by(chromosome, between(y$start, x$start, x$end))
full_join(reference, segments, by)

# Find every time a segment falls completely within a reference.
# Sometimes using `x$` and `y$` makes your intentions clearer, even if they
# match the default behavior.
by <- join_by(chromosome, within(x$start, x$end, y$start, y$end))
inner_join(segments, reference, by)

# Find every time a segment overlaps a reference in any way.
by <- join_by(chromosome, overlaps(x$start, x$end, y$start, y$end))
full_join(segments, reference, by)

# It is common to have right-open ranges with bounds like `[)`, which would
# mean an end value of `415` would no longer overlap a start value of `415`.
# Setting `bounds` allows you to compute overlaps with those kinds of ranges.
by <- join_by(chromosome, overlaps(x$start, x$end, y$start, y$end, bounds = "[)"))
full_join(segments, reference, by)

Description

Find the "previous" (lag()) or "next" (lead()) values in a vector. Useful for comparing values behind of or ahead of the current values.

Usage

lag(x, n = 1L, default = NULL, order_by = NULL, ...)

lead(x, n = 1L, default = NULL, order_by = NULL, ...)

Arguments

Value

A vector with the same type and size as x.

Examples

lag(1:5)
lead(1:5)

x <- 1:5
tibble(behind = lag(x), x, ahead = lead(x))

# If you want to look more rows behind or ahead, use `n`
lag(1:5, n = 1)
lag(1:5, n = 2)

lead(1:5, n = 1)
lead(1:5, n = 2)

# If you want to define a value to pad with, use `default`
lag(1:5)
lag(1:5, default = 0)

lead(1:5)
lead(1:5, default = 6)

# If the data are not already ordered, use `order_by`
scrambled <- slice_sample(
  tibble(year = 2000:2005, value = (0:5) ^ 2),
  prop = 1
)

wrong <- mutate(scrambled, previous_year_value = lag(value))
arrange(wrong, year)

right <- mutate(scrambled, previous_year_value = lag(value, order_by = year))
arrange(right, year)

Description

mutate() creates new columns that are functions of existing variables. It can also modify (if the name is the same as an existing column) and delete columns (by setting their value to NULL).

Usage

mutate(.data, ...)

## S3 method for class 'data.frame'
mutate(
  .data,
  ...,
  .by = NULL,
  .keep = c("all", "used", "unused", "none"),
  .before = NULL,
  .after = NULL
)

Arguments

Value

An object of the same type as .data. The output has the following properties:

• Columns from .data will be preserved according to the .keep argument.

• Existing columns that are modified by ... will always be returned in their original location.

• New columns created through ... will be placed according to the .before and .after arguments.

• The number of rows is not affected.

• Columns given the value NULL will be removed.

• Groups will be recomputed if a grouping variable is mutated.

• Data frame attributes are preserved.

Useful mutate functions

• +, -, log(), etc., for their usual mathematical meanings

• lead(), lag()

• dense_rank(), min_rank(), percent_rank(), row_number(), cume_dist(), ntile()

• cumsum(), cummean(), cummin(), cummax(), cumany(), cumall()

• na_if(), coalesce()

• if_else(), recode(), case_when()

Grouped tibbles

Because mutating expressions are computed within groups, they may yield different results on grouped tibbles. This will be the case as soon as an aggregating, lagging, or ranking function is involved. Compare this ungrouped mutate:

starwars %>%
  select(name, mass, species) %>%
  mutate(mass_norm = mass / mean(mass, na.rm = TRUE))

With the grouped equivalent:

starwars %>%
  select(name, mass, species) %>%
  group_by(species) %>%
  mutate(mass_norm = mass / mean(mass, na.rm = TRUE))

The former normalises mass by the global average whereas the latter normalises by the averages within species levels.

Methods

This function is a generic, which means that packages can provide implementations (methods) for other classes. See the documentation of individual methods for extra arguments and differences in behaviour.

Methods available in currently loaded packages: no methods found.

See Also

Other single table verbs: arrange(), filter(), reframe(), rename(), select(), slice(), summarise()

Examples

# Newly created variables are available immediately
starwars %>%
  select(name, mass) %>%
  mutate(
    mass2 = mass * 2,
    mass2_squared = mass2 * mass2
  )

# As well as adding new variables, you can use mutate() to
# remove variables and modify existing variables.
starwars %>%
  select(name, height, mass, homeworld) %>%
  mutate(
    mass = NULL,
    height = height * 0.0328084 # convert to feet
  )

# Use across() with mutate() to apply a transformation
# to multiple columns in a tibble.
starwars %>%
  select(name, homeworld, species) %>%
  mutate(across(!name, as.factor))
# see more in ?across

# Window functions are useful for grouped mutates:
starwars %>%
  select(name, mass, homeworld) %>%
  group_by(homeworld) %>%
  mutate(rank = min_rank(desc(mass)))
# see `vignette("window-functions")` for more details

# By default, new columns are placed on the far right.
df <- tibble(x = 1, y = 2)
df %>% mutate(z = x + y)
df %>% mutate(z = x + y, .before = 1)
df %>% mutate(z = x + y, .after = x)

# By default, mutate() keeps all columns from the input data.
df <- tibble(x = 1, y = 2, a = "a", b = "b")
df %>% mutate(z = x + y, .keep = "all") # the default
df %>% mutate(z = x + y, .keep = "used")
df %>% mutate(z = x + y, .keep = "unused")
df %>% mutate(z = x + y, .keep = "none")

# Grouping ----------------------------------------
# The mutate operation may yield different results on grouped
# tibbles because the expressions are computed within groups.
# The following normalises `mass` by the global average:
starwars %>%
  select(name, mass, species) %>%
  mutate(mass_norm = mass / mean(mass, na.rm = TRUE))

# Whereas this normalises `mass` by the averages within species
# levels:
starwars %>%
  select(name, mass, species) %>%
  group_by(species) %>%
  mutate(mass_norm = mass / mean(mass, na.rm = TRUE))

# Indirection ----------------------------------------
# Refer to column names stored as strings with the `.data` pronoun:
vars <- c("mass", "height")
mutate(starwars, prod = .data[[vars[[1]]]] * .data[[vars[[2]]]])
# Learn more in ?rlang::args_data_masking

Description

Mutating joins add columns from y to x, matching observations based on the keys. There are four mutating joins: the inner join, and the three outer joins.

Inner join

An inner_join() only keeps observations from x that have a matching key in y.

The most important property of an inner join is that unmatched rows in either input are not included in the result. This means that generally inner joins are not appropriate in most analyses, because it is too easy to lose observations.

Outer joins

The three outer joins keep observations that appear in at least one of the data frames:

• A left_join() keeps all observations in x.

• A right_join() keeps all observations in y.

• A full_join() keeps all observations in x and y.

Usage

inner_join(
  x,
  y,
  by = NULL,
  copy = FALSE,
  suffix = c(".x", ".y"),
  ...,
  keep = NULL
)

## S3 method for class 'data.frame'
inner_join(
  x,
  y,
  by = NULL,
  copy = FALSE,
  suffix = c(".x", ".y"),
  ...,
  keep = NULL,
  na_matches = c("na", "never"),
  multiple = "all",
  unmatched = "drop",
  relationship = NULL
)

left_join(
  x,
  y,
  by = NULL,
  copy = FALSE,
  suffix = c(".x", ".y"),
  ...,
  keep = NULL
)

## S3 method for class 'data.frame'
left_join(
  x,
  y,
  by = NULL,
  copy = FALSE,
  suffix = c(".x", ".y"),
  ...,
  keep = NULL,
  na_matches = c("na", "never"),
  multiple = "all",
  unmatched = "drop",
  relationship = NULL
)

right_join(
  x,
  y,
  by = NULL,
  copy = FALSE,
  suffix = c(".x", ".y"),
  ...,
  keep = NULL
)

## S3 method for class 'data.frame'
right_join(
  x,
  y,
  by = NULL,
  copy = FALSE,
  suffix = c(".x", ".y"),
  ...,
  keep = NULL,
  na_matches = c("na", "never"),
  multiple = "all",
  unmatched = "drop",
  relationship = NULL
)

full_join(
  x,
  y,
  by = NULL,
  copy = FALSE,
  suffix = c(".x", ".y"),
  ...,
  keep = NULL
)

## S3 method for class 'data.frame'
full_join(
  x,
  y,
  by = NULL,
  copy = FALSE,
  suffix = c(".x", ".y"),
  ...,
  keep = NULL,
  na_matches = c("na", "never"),
  multiple = "all",
  relationship = NULL
)

Arguments

Value

An object of the same type as x (including the same groups). The order of the rows and columns of x is preserved as much as possible. The output has the following properties:

• The rows are affect by the join type.

  • inner_join() returns matched x rows.

  • left_join() returns all x rows.

  • right_join() returns matched of x rows, followed by unmatched y rows.

  • full_join() returns all x rows, followed by unmatched y rows.

• Output columns include all columns from x and all non-key columns from y. If keep = TRUE, the key columns from y are included as well.

• If non-key columns in x and y have the same name, suffixes are added to disambiguate. If keep = TRUE and key columns in x and y have the same name, suffixes are added to disambiguate these as well.

• If keep = FALSE, output columns included in by are coerced to their common type between x and y.

Many-to-many relationships

By default, dplyr guards against many-to-many relationships in equality joins by throwing a warning. These occur when both of the following are true:

• A row in x matches multiple rows in y.

• A row in y matches multiple rows in x.

This is typically surprising, as most joins involve a relationship of one-to-one, one-to-many, or many-to-one, and is often the result of an improperly specified join. Many-to-many relationships are particularly problematic because they can result in a Cartesian explosion of the number of rows returned from the join.

If a many-to-many relationship is expected, silence this warning by explicitly setting relationship = "many-to-many".

In production code, it is best to preemptively set relationship to whatever relationship you expect to exist between the keys of x and y, as this forces an error to occur immediately if the data doesn't align with your expectations.

Inequality joins typically result in many-to-many relationships by nature, so they don't warn on them by default, but you should still take extra care when specifying an inequality join, because they also have the capability to return a large number of rows.

Rolling joins don't warn on many-to-many relationships either, but many rolling joins follow a many-to-one relationship, so it is often useful to set relationship = "many-to-one" to enforce this.

Note that in SQL, most database providers won't let you specify a many-to-many relationship between two tables, instead requiring that you create a third junction table that results in two one-to-many relationships instead.

Methods

These functions are generics, which means that packages can provide implementations (methods) for other classes. See the documentation of individual methods for extra arguments and differences in behaviour.

Methods available in currently loaded packages:

• inner_join(): no methods found.

• left_join(): no methods found.

• right_join(): no methods found.

• full_join(): no methods found.

See Also

Other joins: cross_join(), filter-joins, nest_join()

Examples

band_members %>% inner_join(band_instruments)
band_members %>% left_join(band_instruments)
band_members %>% right_join(band_instruments)
band_members %>% full_join(band_instruments)

# To suppress the message about joining variables, supply `by`
band_members %>% inner_join(band_instruments, by = join_by(name))
# This is good practice in production code

# Use an equality expression if the join variables have different names
band_members %>% full_join(band_instruments2, by = join_by(name == artist))
# By default, the join keys from `x` and `y` are coalesced in the output; use
# `keep = TRUE` to keep the join keys from both `x` and `y`
band_members %>%
  full_join(band_instruments2, by = join_by(name == artist), keep = TRUE)

# If a row in `x` matches multiple rows in `y`, all the rows in `y` will be
# returned once for each matching row in `x`.
df1 <- tibble(x = 1:3)
df2 <- tibble(x = c(1, 1, 2), y = c("first", "second", "third"))
df1 %>% left_join(df2)

# If a row in `y` also matches multiple rows in `x`, this is known as a
# many-to-many relationship, which is typically a result of an improperly
# specified join or some kind of messy data. In this case, a warning is
# thrown by default:
df3 <- tibble(x = c(1, 1, 1, 3))
df3 %>% left_join(df2)

# In the rare case where a many-to-many relationship is expected, set
# `relationship = "many-to-many"` to silence this warning
df3 %>% left_join(df2, relationship = "many-to-many")

# Use `join_by()` with a condition other than `==` to perform an inequality
# join. Here we match on every instance where `df1$x > df2$x`.
df1 %>% left_join(df2, join_by(x > x))

# By default, NAs match other NAs so that there are two
# rows in the output of this join:
df1 <- data.frame(x = c(1, NA), y = 2)
df2 <- data.frame(x = c(1, NA), z = 3)
left_join(df1, df2)

# You can optionally request that NAs don't match, giving a
# a result that more closely resembles SQL joins
left_join(df1, df2, na_matches = "never")

Description

n_distinct() counts the number of unique/distinct combinations in a set of one or more vectors. It's a faster and more concise equivalent to nrow(unique(data.frame(...))).

Usage

n_distinct(..., na.rm = FALSE)

Arguments

Value

A single number.

Examples

x <- c(1, 1, 2, 2, 2)
n_distinct(x)

y <- c(3, 3, NA, 3, 3)
n_distinct(y)
n_distinct(y, na.rm = TRUE)

# Pairs (1, 3), (2, 3), and (2, NA) are distinct
n_distinct(x, y)

# (2, NA) is dropped, leaving 2 distinct combinations
n_distinct(x, y, na.rm = TRUE)

# Also works with data frames
n_distinct(data.frame(x, y))

Description

This is a translation of the SQL command NULLIF. It is useful if you want to convert an annoying value to NA.

Usage

na_if(x, y)

Arguments

Value

A modified version of x that replaces any values that are equal to y with NA.

See Also

coalesce() to replace missing values with a specified value.

tidyr::replace_na() to replace NA with a value.

Examples

na_if(1:5, 5:1)

x <- c(1, -1, 0, 10)
100 / x
100 / na_if(x, 0)

y <- c("abc", "def", "", "ghi")
na_if(y, "")

# `na_if()` allows you to replace `NaN` with `NA`,
# even though `NaN == NaN` returns `NA`
z <- c(1, NaN, NA, 2, NaN)
na_if(z, NaN)

# `na_if()` is particularly useful inside `mutate()`,
# and is meant for use with vectors rather than entire data frames
starwars %>%
  select(name, eye_color) %>%
  mutate(eye_color = na_if(eye_color, "unknown"))

# `na_if()` can also be used with `mutate()` and `across()`
# to alter multiple columns
starwars %>%
   mutate(across(where(is.character), ~na_if(., "unknown")))

Description

This is a safe way of comparing if two vectors of floating point numbers are (pairwise) equal. This is safer than using ==, because it has a built in tolerance

Usage

near(x, y, tol = .Machine$double.eps^0.5)

Arguments

Examples

sqrt(2) ^ 2 == 2
near(sqrt(2) ^ 2, 2)

Description

A nest join leaves x almost unchanged, except that it adds a new list-column, where each element contains the rows from y that match the corresponding row in x.

Usage

nest_join(x, y, by = NULL, copy = FALSE, keep = NULL, name = NULL, ...)

## S3 method for class 'data.frame'
nest_join(
  x,
  y,
  by = NULL,
  copy = FALSE,
  keep = NULL,
  name = NULL,
  ...,
  na_matches = c("na", "never"),
  unmatched = "drop"
)

Arguments

Value

The output:

• Is same type as x (including having the same groups).

• Has exactly the same number of rows as x.

• Contains all the columns of x in the same order with the same values. They are only modified (slightly) if keep = FALSE, when columns listed in by will be coerced to their common type across x and y.

• Gains one new column called {name} on the far right, a list column containing data frames the same type as y.

Relationship to other joins

You can recreate many other joins from the result of a nest join:

• inner_join() is a nest_join() plus tidyr::unnest().

• left_join() is a nest_join() plus tidyr::unnest(keep_empty = TRUE).

• semi_join() is a nest_join() plus a filter() where you check that every element of data has at least one row.

• anti_join() is a nest_join() plus a filter() where you check that every element has zero rows.

Methods

This function is a generic, which means that packages can provide implementations (methods) for other classes. See the documentation of individual methods for extra arguments and differences in behaviour.

The following methods are currently available in loaded packages: no methods found.

See Also

Other joins: cross_join(), filter-joins, mutate-joins

Examples

df1 <- tibble(x = 1:3)
df2 <- tibble(x = c(2, 3, 3), y = c("a", "b", "c"))

out <- nest_join(df1, df2)
out
out$df2

Description

These are useful helpers for extracting a single value from a vector. They are guaranteed to return a meaningful value, even when the input is shorter than expected. You can also provide an optional secondary vector that defines the ordering.

Usage

nth(x, n, order_by = NULL, default = NULL, na_rm = FALSE)

first(x, order_by = NULL, default = NULL, na_rm = FALSE)

last(x, order_by = NULL, default = NULL, na_rm = FALSE)

Arguments

Details

For most vector types, first(x), last(x), and nth(x, n) work like x[[1]], ⁠x[[length(x)]⁠, and x[[n]], respectively. The primary exception is data frames, where they instead retrieve rows, i.e. x[1, ], x[nrow(x), ], and x[n, ]. This is consistent with the tidyverse/vctrs principle which treats data frames as a vector of rows, rather than a vector of columns.

Value

If x is a list, a single element from that list. Otherwise, a vector the same type as x with size 1.

Examples

x <- 1:10
y <- 10:1

first(x)
last(y)

nth(x, 1)
nth(x, 5)
nth(x, -2)

# `first()` and `last()` are often useful in `summarise()`
df <- tibble(x = x, y = y)
df %>%
  summarise(
    across(x:y, first, .names = "{col}_first"),
    y_last = last(y)
  )

# Selecting a position that is out of bounds returns a default value
nth(x, 11)
nth(x, 0)

# This out of bounds behavior also applies to empty vectors
first(integer())

# You can customize the default value with `default`
nth(x, 11, default = -1L)
first(integer(), default = 0L)

# `order_by` provides optional ordering
last(x)
last(x, order_by = y)

# `na_rm` removes missing values before extracting the value
z <- c(NA, NA, 1, 3, NA, 5, NA)
first(z)
first(z, na_rm = TRUE)
last(z, na_rm = TRUE)
nth(z, 3, na_rm = TRUE)

# For data frames, these select entire rows
df <- tibble(a = 1:5, b = 6:10)
first(df)
nth(df, 4)

Description

ntile() is a sort of very rough rank, which breaks the input vector into n buckets. If length(x) is not an integer multiple of n, the size of the buckets will differ by up to one, with larger buckets coming first.

Unlike other ranking functions, ntile() ignores ties: it will create evenly sized buckets even if the same value of x ends up in different buckets.

Usage

ntile(x = row_number(), n)

Arguments